Scientific Lectures

The scientific staff lectures cover a wide range of topics and reflect the Institute's diverse research areas.

2019

Angster, Judit; Rucz, Péter; Miklós, András

  • 25 years applied pipe organ research at Fraunhofer IBP in Stuttgart. Proceedings of the International Symposium on Music Acoustics (ISMA 2019), Detmold, 14. September 2019.

Antretter, Florian

  • HAMT Extension for EnergyPlus encompasses moisture sources due to air leakage. ASHRAE Winter Conference, Atlanta (USA), 13. Januar 2019.
  • Dynamic modelling of 3-dimensional thermal bridges – Energy and moisture impact. ASHRAE Annual Conference, Kansas City (USA), 25. Juni 2019.

Betten, Thomas; Bouslama, Raed; Wehner, Daniel; Uusitalo, Ville

  • Unlocking sustainability potentials in product development through extended knowledge and predictions about the product use phase. Symposium für Produktentwicklung 2019, Stuttgart, 16. Mai 2019.

Betten, Thomas; Wehner, Daniel; Hämmerl, Robert; Briem, Ann-Kathrin; Zheng, Moqian

  • Assessing potential environmental benefits of planned product obsolescence based on individual user behaviour by life cycle assessment and scenario analysis. 3rd PLATE 2019 Conference, Berlin, 20. September 2019.

Betten, Thomas; Wehner, Daniel; Pfeuffer, Simon

  • Managing uncertainty in life cycle assessment with methods of data science. EnviroInfo 2019, Kassel, 26. September 2019.

Bludau, Christian

  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • Evaluation of hygrothermal simulation results. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • Initial conditions, sources and sinks. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • WUFI® Pro Practice Session. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • Input data – Material properties, climate and surface transfer. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • The WUFI® Family. WUFI® Workshop Heat & Moisture Simulation, London (Vereinigtes Königreich), 14.–15. February 2019.
  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • Evaluation of hygrothermal simulation results. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • Initial conditions, sources and sinks. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • WUFI® Pro Practice Session. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • Input data – Material properties, climate and surface transfer. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • The WUFI® Family. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.
  • WUFI® Practical – Evaluation of mould growth using WUFI® Bio. WUFI® Workshop Heat & Moisture Simulation, London, 28.–29. November 2019.

Briem, Ann-Kathrin; Betten, Thomas; Wehner, Daniel

  • Personalized Life Cycle Assessment (LCA) – Reflecting individuality within the methodological framework. 13th International Conference on Society and Materials, Pisa (Italien), 20. Mai 2019.

de Boer, Jan

  • Introduction to IEA SHC Task 61 / EBC Annex 77. International Daylighting and Electric Lighting Innovation Technology Conference 2019, Peking (China), 27. März 2019.
  • Integrated solutions for daylighting and electric lighting – Introducing IEA Task 66 Annex 77. ISDL 2019 – 4th IEA Industry workshop, Danzig (Polen), 16. September 2019.

de Boer, Jan; Geisler-Moroder, David

  • Integrated solutions for daylight and electric lighting – From component to user-centered system efficiency. Workshop »IEA Solar Heating and Cooling Research Co-operation«, Wien (Österreich), 5. Juni 2019.

de Boer, Jan; Moghtader, Sohéil

  • Allocation of ISO 10916 calculation of the impact of daylight utilization on the net and final energy demand for lightning to ISO/TC 274/JWG 1. 8th Meeting ISO/TC 274/JWG1, Stockholm (Schweden), 21. Mai 2019.

Di Bari, Roberta; Horn, Rafael

  • Storage LCA – A tool for the investigation of the environmental potential of innovative storage systems in buildings. 15. Ökobilanzwerkstatt, Stuttgart, 19. September 2019.

Erhorn, Hans; Wössner, Simon

  • Towards the EPDB implementation – A practical software approach for an EPC calculation. 21th Energy Efficiency Coordination Group Meeting and Workshop, Wien (Österreich), 20. November 2019.

Erhorn-Kluttig, Heike

  • Cost-efficient Nearly Zero-Energy Buildings (NZEBs). 10th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings (IAQVEC), Bari (Italien), 6. September 2019.

Fischer, Matthias; Betten, Thomas; Wehner, Daniel

  • Product variability and personalization in dynamic LCA and LCM. The 9th International Conference on Life Cycle Management, Posen (Polen), 2. September 2019.

Geisler Moroder, David; de Boer, Jan

  • IEA activities towards standardizations for daylight system characterizations and hourly rating methods. VELUX Daylight Symposium 2019, Paris (Frankreich), 9. Oktober 2019.

Illner, Micha; Erhorn-Kluttig, Heike; Erhorn, Hans

  • Cost-efficient Nearly Zero-Energy Buildings – CoNZEBs. CLIMA2019, Bukarest (Rumänien), 28. Mai 2019.

Kaiser, Christian

  • RealCycle of concrete. Din-Connect 2020, Berlin, 7. November 2019.

Koehler, Mark

  • Acoustic impact of building facades in urban context. NEXT Facade Session by Wicona, Frankfurt am Main, 12. November 2019.

Krus, Martin

  • Typha augustifolia as basis for an innovative building material. Building with Typha for professionals, Amsterdam (Niederlande), 14. März 2019.

Künzel, Hartwig

  • Hygrothermal building component simulation. Workshop, Singapur (Singapur), 22. Juli 2019.
  • Hygrothermal simulation – The future in building design. Wood &Grieve Engineers, Melbourne (Australien), 29. August 2019.
  • Design weaknesses that contribute to moisture and condensation. Master Builders Green Living Conference, Melbourne (Australien), 30. August 2019.
  • Research at Fraunhofer IBP. Proclima HUB, Auckland (Australien), 5. September 2019.
  • Healthy indoor environment through moisture control considerations during design and installation. PrefabAUS Conference, Sydney (Australien), 11. September 2019.
  • Understanding moisture transfer processes – A prerequisite for sustainable buildings. Australian Institute of Architects, Hobart (Australien), 26. September 2019.
  • Understanding moisture transfer processes – A prerequisite for sustainable buildings. Australian Institute of Architects, Launceston (Australien), 27. September 2019.
  • Understanding moisture transfer processes – A prerequisite for sustainable buildings. Nationwide House Energy Rating Scheme (NatHERS), video-presentation from Launceston (Australien), 4. Oktober 2019.
  • Energy and resource efficient materials for sustainable constructions – How can we overcome barriers of implementing energy efficient and sustainable building in Vietnam? CAMaRSEC(Climate-Adapted Material Research forthe Socio-Economic Context in Vietnam) Starter Conference, Hanoi (Vietnam), 10. Oktober 2019.
  • Introduction to Fraunhofer IBP and moisture effects on buildings. KICT Seminar, Seoul (Südkorea), 22. Oktober 2019.
  • Meeting global building challenges requires improved hygrothermal design. Finnish Building Physics Symposium, Tampere (Finnland), 28. Oktober 2019.
  • Airtightness and Drying Potential – Key Issues for Moisture Control. 14th Annual North American Passive House Conference, Washington DC (USA), 7. Dezember 2019.
  • Durable, energy efficient and comfortable buildings are no science fiction. Buildings XIV International Conference, Clearwater (USA), 9. Dezember 2019.
  • Fast, energy efficient and noiseless wall drying system. Buildings XIV International Conference, Clearwater (USA), 11. Dezember 2019.

Lorenz, Manuel

  • Water footprint analysis of membrane technology for waste acid treatment. 15. Ökobilanzwerkstatt, Stuttgart, 19. September 2019.

Lozanovski, Aleksandar

  • LCA of CO2 direct air capture. ICCDU XVII, Aachen, 26. Juli 2019.
  • LCA of CO2 direct air capture. LCA – Methodenharmonisierung und Arbeitsgruppen-KickOff mit Förderschwerpunkt »Energiewende im Verkehr«, München, 12. November 2019.

Martin, Noemi

  • Classroom acoustics – Effects on speech intelligibility and learning. International Convention of Psychological Science (ICPS), Paris (Frankreich), 7.–9. März 2019.

Müller, Benjamin; Liebl, Andreas; Martin Noemi

  • Influence of active-noise-cancelling headphones on cognitive performance and employee satisfaction in open space offices. 23rd International Congress on Acoustics, Aachen, 9.–13. September 2019.

Neves Pimenta, Daniel

  • Mass Personalization – User-centered development of lighting solutions and services. LpS 2019 – 9th International Lighting Technologies Event, Bregenz (Österreich), 24. September 2019.

Prenzel, Tobias Manuel

  • Environmental performance of printed electronics. Necomada-Workshop II »From nanomaterials to realizing the internet of things«, Sedgefield (England), 27. November 2019.

Prenzel, Tobias Manuel; Gehring, Florian; Albrecht, Stefan; Krieg, Hannes; Fischer, Matthias

  • Printed electronics – Sustainable enabler for the internet of things? The 9th International Conference on Life Cycle Management, Posen (Polen), 2. September 2019.

Rucz, Péter; Angster, Judit; Miklós, András

  • Finite element simulation of radiation impedances with applications for musical instrument design. Proceedings of the International Symposium on Music Acoustics (ISMA 2019), Detmold, 15. September 2019.

Tanaka, Eri

  • Moisture control for low energy building. Hokkaido (Japan), 4. Juni 2019.
  • Moisture control for low energy building. Nagoya (Japan), 4. Juni 2019.
  • Potential of cellulose fibre insulation material – From the hygrothermal point of view. Tokio (Japan), 7. Juni 2019.

Wadle, Lisa-Marie

  • Green Follows Function. Event Biophilic Design, München, 27. Juni 2019.
  • Privacy and personalization – Does disclosure of personal data depend on the benefit promised by personalization? 27th ACM International Conference on User Modeling, Adaptation and Personalization, Larnaka (Zypern), 9.–12. Juni 2019.

Wehner, Daniel; Betten, Thomas; Fischer, Matthias; Scagnetti, Carla

  • Sustainability stress test as a tool for the reliable assessment of the use phase for complex and personalized products in the development phase. 9th International Conference on Life Cycle Management, Posen (Polen), 4. September 2019.

Winkler, Matthias

  • [UC]² – Urban Climate under Change and »ProPolis« – Use of urban large-eddy simulation models. BIM World 2019, München, 27. November 2019.

Wössner, Simon

  • EPC Software for Montenegro. Workshop »Beta Version for EPCSoftwareMNE«, Podgorica (Montenegro), 18. Dezember 2019.

Wössner, Simon; Budde, Eike

  • EPC Software for Montenegro. Workshop »Requirements Engineering for EPC Software«, Podgorica (Montenegro), 6. Mai 2019.

Wössner, Simon; Erhorn, Hans

  • Recommendations for national implementation of EPBD. Workshop »Recommendations for national Implementation – Possibilities for enforcing the use of the software by embedding it into the national implementation of the EPBD and other recommendations for the national implementation of the EPBD«, Podgorica (Montenegro), 27. März 2019.
  • Recommendations for national implementation of EPBD. Workshop »Recommendations for national implementation of the EPBD«, Tiflis (Georgien), 4. Juli 2019.

Zirkelbach, Daniel

  • Hygrothermal performance and durability of insulation materials. Industrie-Workshop, Holzkirchen, 26. März 2019.
  • Standards for evaluation of constructions using hygrothermal simulations. KICT Hygrothermics Conference, Seoul (Südkorea), 22. Oktober 2019.

2018

Akbary, Niro; Aleysa, Mohammadshayesh

  • Intelligent combustion and emissions monitoring system (CCEM-System) for low pollutants and high efficiency in biomass combustion plants. 7th international symposium on energy from biomass and waste, Venedig (Italien), 17. Oktober 2018

Antretter, Florian

  • Why is building envelope design so complicated? ASHRAE Winter Conference 2018, Chicago (USA), 24. Januar 2018
  • Residential whole building energy and moisture modeling for integral building design for hot and humid weather. ASHRAE Annual Conference 2018, Houston (USA), 25. Juni 2018

Aoki, Yohko

  • Band structure and sound transmission loss of infinite periodic partitions – Numerical studies with COMSOL. DAGA 2018 – 44. Jahrestagung für Akustik, München, 19.–22. März 2018

Bergmann, Antje

  • Efficiency house plus – A new Generation of high performance buildings. Internationale Konferenz »Niedrigstenergiegebäude – NZEB für alle«, Zagreb (Kroatien), 10. April 2018

Betten, Thomas; Wehner, Daniel

  • Integration of big data analytics into life cycle assessment. LCA XVIII, Fort Collins (USA), 25.–27. September 2018

Bichlmair, Stefan

  • Data logger and climate measurements for preventive conservation. Mazedonien Expert Group, Valley, 18. Oktober 2018

Bichlmair, Stefan; Krus, Martin; Kilian, Ralf

  • A baroque hayrick as storage centre for pipe organs – Whole building simulation of different climatization strategies in the context of primary energy demand. EEHB 2018: The 3rd International Conference on Energy Efficiency in Historic Buildings, Visby (Schweden), 26.–27. September 2018

Bludau, Christian

  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • Evaluation of hygrothermal simulation results. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • Initial conditions, sources and sinks. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • WUFI® Pro Practice Session. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • Input data – Material properties, climate and surface transfer. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • The WUFI® Family. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 19.–20. April 2018
  • Differences between 1D and 2D calculations. WUFI® 2D Introduction for ANIT, Holzkirchen, 29. Juni 2018
  • Façade intersection – Example. WUFI® 2D Introduction for ANIT, Holzkirchen, 29. Juni 2018
  • Practical presentation – Building up a flat roof in WUF® I 2D. WUFI® 2D Introduction for ANIT, Holzkirchen, 29. Juni 2018
  • Adaption of material properties. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • Input data – Material properties, climate and surface transfer. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • Initial conditions, sources and sinks. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • Shading models for roofs. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • WUFI® 2D example case – Façade intersection. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • Hands on WUFI® 2D. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • Hands on WUFI® Graph. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • WUFI® 2D project work. WUFI® Course Proclima AU, Holzkirchen, 2.–10. Juli 2018
  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • Input data – Material properties, climate and surface transfer. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • Initial conditions, sources and sinks. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Pro program tour. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Practical – Using the WUFI® material database. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Practical – Using the WUFI® climate database. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Practical – Using WUFI® Graph. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • Evaluation of hygrothermal simulation results. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Pro Practice Session. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Practical – Evaluation of mould growth using WUFI® Bio. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • WUFI® Family. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018
  • Handling of typical construction. WUFI® Inhouse Workshop BDP, Manchester (Vereinigtes Königreich), 4.–5. Oktober 2018

Bos, Ulrike; Horn, Rafael; Maier, Stephanie; Lindner, Jan Paul; Deimling, Sabine

  • GIS based regionalized land use characterization factors for life cycle impact assessment using LANCA. LCA Food 2018, Bangkok (Thailand), 16.–20. Oktober 2018

Brandstätt, Peter

  • Room acoustics in hotels. Halbmond Teppichwerke 2018, Oelsnitz, 16. Mai 2018
  • Room acoustics – Sound perception and design. BASF Internationales Basotect-Forum 2018, Perl-Nennig, 28. September 2018

Briem, Ann-Kathrin; Held, Michael; Dimmler, Bernhard

  • Life cycle assessment of CIGS PV modules – Update of current production conditions in Germany and investigation of a planned factory in China. 35th European Photovoltaic Solar Energy Conference and Exhibition, Brussel (Belgien), 24.–28. September 2018

Budde, Eike

  • The »District Energy Concept Adviser«. Technology Innovation Conference: Energy and Buildings, Wels (Österreich), 2. März 2018

de Boer, Jan

  • Integrated solutions for daylighting and electric lighting – Introducing IEA Task 66 Annex 77. 1st Industry Workshop des IEA SHC Task 61 / EBC Annex 77 »Integrated Solutions for Daylight and Electric Lighting«, Lund (Schweden), 28. Februar 2018
  • Integrated solutions for daylighting and electric lighting – Introducing IEA Task 66 Annex 77. 2nd Industry Workshop des IEA SHC Task 61 / EBC Annex 77 »Integrated Solutions for Daylighting and Electric Lighting««, Lausanne (Schweiz), 5. September 2018
  • Lab measurements and field testing of integrated systems. 13th Conference of Advanced Building Skin, Bern (Schweiz), 2. Oktober 2018

Dickschen, Alexander

  • Evaluating room acoustic quality in open-plan offices by adding the distribution of possible source and receiver positions to the simulation. Proceedings of Euronoise, Kreta (Griechenland) 27.–31. Mai 2018

Erhorn, Hans

  • Energy assessment of smart technologies – Plus energy school Stuttgart. In-depth Workshop EU Concerted Action EPBD, Frankfurt, 23. Mai 2018
  • Driving energy efficiency through residential scorecards – German experiences. Expert discussion on residential energy scorecards hosted by Fraunhofer USA Center for Sustainable Energy Systems (CSE), Boston (USA.), 12. Juni 2018

Erhorn-Kluttig, Heike

  • The district energy concept adviser – A simple tool for the assessment of energy concepts of city quarters. MODER Event, München, 7. März 2018

Franz, Mario; Stephan, Wolfram; Schade, Almuth

  • Beurteilung innovativer Fassadenladenkonzepte – Erweiterung der VDI 6007-2. BAUSIM, 26.–28. September 2018

<

Georgiev, Georgi

  • Sustainable building. Urban and spatial development, Shanghai (China), 30. Mai 2018
  • Sustainable regional development and industry 4.0. Plovdiv (Bulgarien), 14. Juni 2018
  • CEN standard – Sustainable energy retrofit process management for multi-occupancy residential buildings with owner communities. EIP-SCC Annual Assembly – EIP-SCC IPPR Market Demand & Interested Stakeholders, Sofia (Bulgarien), 27. Juni 2018
  • EIP-SCC Annual Assembly – EIP-SCC UAM. Urban Air Mobility in the Region of Plovdiv (Bulgaria), Sofia (Bulgarien), 27. Juni 2018
  • Circular economy and environment 2018. Circular economy and sustainable regional development, Sofia (Bulgarien), 2. Oktober 2018
  • Urban and spatial development with TYPHABOARD. Sustainable building, Shanghai (China), 27. Oktober 2018
  • SMARTER TOGETHER – Energy efficiency in residential buildings with owner communities in Munich and Sofia. Knowledge and Smart Cities & EIP-SCC IPPR, Sofia (Bulgarien), 26. November 2018
  • Urban air mobility – Urban planning integration. Amsterdam Drone Week, Amsterdam (Niederlande), 28. November 2018

Hofbauer, Wolfgang

  • Nuisance algae and fungi on façades and prerequisites for their growth. European Coatings Technology Forum »Leveraging Facade Coatings for tomorrow«, Berlin, 18. Oktober 2018

Horn, Rafael; Burr, Matthias; Fröhlich, Dominik; Gschwander, Stefan; Held, Michael; Lindner, Jan Paul; Munz, Gunther; Nienborg, Björn; Schossig, Peter

  • LCA of innovative materials for thermal energy storage in buildings. CIRP Conference on Life Cycle Engineering, Kopenhagen (Dänemark), 30. April 2018

Ilg, Robert; Wehner, Daniel; Betten, Thomas

  • Identification of resource potentials in lightweight construction through targeted holistic value chain analysis. LCA XVIII, Fort Collins (USA), 25.–27. September 2018

Ilg, Robert; Wehner, Daniel; Briem, Ann-Kathrin; Held, Michael

  • Digitization and personalization – Driver or challenge for sustainability? Symposium »think 2018«, Stuttgart, 6.–8. März 2018

Illner, Micha

  • Feasibility study of a carbon neutral district in Munich. MODER Event, München, 7. März 2018
  • Neckarpark Stuttgart – District heat from waste water. International Sustainable Energy Conference 2018, Graz (Österreich), 5. Oktober 2018

Jäger, Michael

  • The scope of platforms – How to investigate the sustainability of new business models of the sharing economy. 5th International Workshop on the Sharing Economy, Mannheim, 28.–29. Juni 2018

Ko, Nathanael; Knüpffer, Eva; Schlegl, Friederike; Horn, Rafael; Krieg, Hannes

  • LCA based calculation of the value added of products. SAM 12, Metz (Frankreich), 22.–23. Mai 2018

Ko, Nathanael; Lorenz, Manuel; Horn, Rafael; Krieg, Hannes; Baumann, Michael

  • Sustainability Assessment of (CSP) Tower Plants. CIRP Conference on Life Cycle Engineering, Kopenhagen (Dänemark), 1. Mai 2018

Ko, Nathanael; Lozanovski, Aleksandar; Held, Michael

  • Optimised process chain for ressource efficient methanol synthesis accompanied by LCA. ICCDU XIV, Rio de Janeiro (Brasilien), 27.–30. August 2018

Koutsomarkos, Konstantinos

  • MODER – District energy concept advisor. 1st National Roadshow of INTENSSS-PA-Project, Thessaloniki (Griechenland), 15. Juni 2018

Krus, Martin; Thiel, André; Kilian, Ralf

  • Investigations on the influence of different types of restoration of beam ends of the floor in the Alte Schäfflerei Benediktbeuern. EEHB 2018: The 3rd International Conference on Energy Efficiency in Historic Buildings, Visby (Schweden), 26.–27. September 2018

Künzel, Hartwig Michael

  • Building envelopes and their potential to reduce urban heat and to improve urban air quality. European Coatings Technology Forum, Berlin, 18. Oktober 2018
  • Building envelope science – Health, durability, energy and fire safety. AIRAH Building Physics Forum, Wollongong (Australien), 22. November 2018
  • Introduction to WUFI®. AIRAH Workshop, Wollongong (Australien), 22.–23. November 2018
  • Analysing the risk of moisture accumulation and mould growth in New Zealand Building. Proclima HUB, Auckland (Neuseeland), 28. November 2018
  • Windows that work. Proclima HUB, Auckland (Neuseeland), 28. November 2018

Leistner, Philip

  • Green Follows Function. Messe Orgatec: Forum »Inspired Collaborations« 2018, Köln, 27.–31. Oktober 2018

Lindner, Jan Paul; Fehrenbach, Horst; Winter, Lisa; Bischoff, Mascha; Blömer, Judith

  • A consistent variable-scale biodiversity impact assessment structure. LCA Food 2018, Bangkok (Thailand), 16.–20. Oktober 2018

Lindner, Jan Paul; Perennes, Marie; Koellner, Thomas

  • Quantification of land use impacts on biodiversity with local ecosystem indicators – A case study in southwestern Germany. LCA Food 2018, Bangkok (Thailand), 16.–20. Oktober 2018

Lorenz, Manuel; Krieg, Hannes; Gehring, Florian; Nemati, Ehsan

  • Environmental potentials of resource recovery by membrane technology in the copper plating industry – A life cycle assessment approach. SDEWES2018, Palermo (Italien), 30. September–4. Oktober 2018

Lozanovski, Aleksandar; Brandstetter, Peter; Held, Michael

  • Cleaning the air from CO2 – LCA of a CO2 direct air capture plant. ICCDU XIV, Rio de Janeiro (Brasilien), 27.–30. August 2018
  • Life cycle assessment of power-to-liquid blue crude production. ICCDU XIV, Rio de Janeiro (Brasilien), 27.–30. August 2018

Lozanovski, Aleksandar; Majid, Muhammad; Heberle, Arthur

  • Optimised process chain for resource efficient methanol synthesis – OptiMeOH. 6th Conference on Carbon Dioxide as Feedstock for Fuels, Chemistry and Polymers, Köln, 15.–16. März 2018

Mayer, Florian

  • CognitAir – CO2 and VOCS requirements for aircraft cabins / occupied spaces based on cognitive performance, comfort responses and physiological chances depending on pressure level. BDLI, Frankfurt am Main, 3. Dezember 2018

Maysenhölder, Waldemar

  • Sound transmission loss of one-dimensional systems containing fictitious metamaterials. DAGA 2018 – 44. Jahrestagung für Akustik, München, 19.–22. März 2018

Michette, Martin; Bichlmair, Stefan; Kilian, Ralf

  • Diagnosing decay mechanisms at the Porta Nocera Necropolis, Pompeii – The first step towards effective preventive conservation. IIC 2018 Turin Congress – Preventive Conservation: The State of the Art. 27th Biennial Congress, Turin (Italien), 10.–14. September 2018

Neves Pimenta, Daniel

  • Mass Personalization – B2U Integration in Lighting. 2. Workshop »Lighting & Mass Personalization«, Stuttgart, 15. November 2018

Nienborg, Björn; Gschwander, Stefan; Munz, Gunther; Fröhlich, Dominik; Helling, Tobias; Horn, Rafael; Klinker, Felix; Weinläder, Helmut; Schossig, Peter

  • Life cycle assessment of thermal energy storage materials, components and systems. IRES 2018, Düsseldorf, 14. Februar 2018

Sedlbauer, Klaus Peter

  • Climate culture building. Messe München, 18. Januar 2018

Sevilmis, Neyir; Ilg, Robert; Moll, Torsten

  • Advanced machining and additive manufacturing for eco-design. Internationale Luftfahrtausstellung (ILA), Berlin, 26. April 2018

Wehner, Daniel

  • Sustainability in the age of digitalization and personalization. EcoBalance, Tokio (Japan), 9.–12. Oktober 2018
  • Life cycle assessment in the age of digitalization and personalization. 6th Chinese Forum on Life Cycle Assessment and applied big data analytics technology, Peking (China), 17.–19. Oktober 2018
  • Data requirements for eco-design of personalized products. Tsinghua University Lectures on Life Cycle Assessment, Peking (China), 20. Oktober 2018
  • Fraunhofer technologies, data and services for achieving sustainability through personalization. Guest lecture at Zhengzhou University, Zhengzhou (China), 23. Oktober 2018

Wehner, Daniel; Chen, Xiaobo; Petruccelli, Luca; Marshall, Kim; Clifton, Andrew; Schulz, Sebastian

  • Development of industry-focused, life cycle assessment enhanced eco-design software. CIRP Conference on Life Cycle Engineering, Kopenhagen (Dänemark), 2. Mai 2018

Zirkelbach, Daniel

  • Fundamentals of hygrothermal simulation models and validation. WUFI® 2D Workshop, Holzkirchen, 8.–9. März 2018
  • WUFI® 2D application examples – Window joints, wooden wall bases, façade penetrations. WUFI® 2D Workshop, Holzkirchen, 8.–9. März 2018
  • Evaluation of hygrothermal simulation results. WUFI® 2D Workshop, Holzkirchen, 8.–9. März 2018
  • Material properties, climate and surface transfer. WUFI® 2D Workshop, Holzkirchen, 8.–9. März 2018
  • Improvement of the Numerical settings. WUFI® 2D Workshop, Holzkirchen, 8.–9. März 2018
  • Durability evaluation of constructions using hygrothermal simulations. CIB W080 Annual Meeting, Ottawa (Kanada), 20. September 2018
  • Differences between 1D and 2D Simulations. WUFI® 2D Workshop, Oslo (Norwegen), 26.–27. September 2018
  • WUFI® 2D hands-on and guided tour. WUFI® 2D Workshop, Oslo, (Norwegen), 26.–27. September 2018
  • Examples on WUFI® 2D calculations from building practice. WUFI® 2D Workshop, Oslo, (Norwegen), 26.–27. September 2018
  • WUFI® 2D hands-on and guided tour. WUFI® 2D Workshop, Oslo, (Norwegen), 26.–27. September 2018
  • How to evaluate hygrothermal simulation results. WUFI® 2D Workshop, Oslo, (Norwegen), 26.–27. September 2018

2017

Adachi, Seiji; Bay, Karlheinz; Brandstätt, Peter; Herget, Wolfgang; Simpson, John

  • Aerodynamic and aeroacoustic wind tunnel test of a half wing model with a full-span droop-nose leading edge. DAGA 2017: 43. Jahrestagung für Akustik, Kiel, 6.–9. März 2017

Antretter, Florian

  • Critical discussion of a shading calculation method for low energy building and passive house design. 11th Nordic Symposium on Building Physics (NSB2017), Trondheim (Norwegen), 12.–14. Juni 2017
  • Hygrothermal Considerations for Building Envelopes in Passive Buildings. ASHRAE Annual Conference, Long Beach (USA), 27. Juni 2017
  • What’s next – bringing parametric modeling and data visualization to WUFI® Passive. 12th Annual North American Passive House Conference (NAPHC), Seattle (USA), 30. September 2017

Baumann, Michael; Salzinger, Michael; Remppis, Simon; Schober, Benjamin; Held, Michael; Graf, Roberta

  • Reducing the environmental impacts of electric vehicles and electricity supply: How Hourly Defined Life Cycle Assessment and smart charging can contribute. EVS30 Symposium, Stuttgart, 9. Oktober 2017

Beck, Tabea; Albrecht, Stefan; Bos, Ulrike

  • Harmonization of LCA for bio-based products. Bioeconomy Congress, Hohenheim, 13. September 2017

Bludau, Christian

  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • Evaluation of hygrothermal simulation results. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • Handling of Typical Constructions. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • Initial Conditions, Sources and Sinks. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • WUFI® Pro Practice Session. WUFI® Pro Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • Input data: material properties, climate and surface transfer. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • The WUFI® Family. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 23.–24. März 2017
  • Differences between 1D and 2D calculations. WUFI® Seminar for WIGWAM, Holzkirchen, 19. April 2017
  • Fundamentals of hygrothermal simulation models. WUFI® Seminar for WIGWAM, Holzkirchen, 19. April 2017
  • Material Properties, climate and surface transfer. WUFI® Seminar for WIGWAM, Holzkirchen, 19. April 2017
  • Hands on WUFI® 2D. WUFI® Seminar for WIGWAM, Holzkirchen, 19. April 2017
  • Project Work with simple 2D example. WUFI® Seminar for WIGWAM, Holzkirchen, 19. April 2017
  • Hands on Tour durch WUFI® 2D. WUFI® 2D Seminar, Holzkirchen, 21.–22. Juni 2017
  • Fundamentals of Hygrothermal Simulation Models and Validation. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017
  • Initial Conditions, Sources and Sinks. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017
  • Handling of Typical Constructions in WUFI®. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017
  • WUFI® Pro Practice Session. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017
  • Overview WUFI® Family. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017

Bos, Ulrike; Horn, Rafael; Maier, Stephanie; Lindner, Jan Paul; Perennes, Marie

  • Evaluation of regionalized land use and biodiversity aspects in LCA for biobased products. 5th Meeting Lignocellulose, Research Programme Bioeconomy BW, Heidelberg, 13. März 2017
  • Evaluation of regionalized land use and biodiversity aspects in LCA for biobased products. The Social Sciences Perspective on Bioeconomy, Bioeconomy Graduate Program BBW ForWerts, Heidelberg, 31. März 2017

Erhorn, Hans

  • Cost Reduction Strategies for Nearly Zero-Energy Buildings in Europe. Kick-off Meeting CoNZEBs, Berlin, 14. Juni 2017

Erhorn-Kluttig, Heike

  • Management of the Integrated EU-Project CoNZEBs. Kick-off Meeting CoNZEBs, Berlin, 13. Juni 2017
  • Communication to Stakeholders and Dissemination. Kick-off Meeting CoNZEBs, Berlin, 14. Juni 2017
  • The District Energy Concept Adviser – A Software Tool to Support Urban Decision Makers in Planning District Energy Supply Schemes. MODER Conference, Riga (Lettland), 5. Oktober 2017

Held, Michael; Schücking, Maximilian

  • Life Cycle Assessment of electric vehicles in shuttle traffic – field test results of the project RheinMobil. EVS30 Symposium, Stuttgart, 10. Oktober 2017

Hofbauer, Wolfgang Karl

  • New sustainable materials Resistance against microbial infestation. Bau 2017, München, 17. Januar 2017
  • Results of an European FP7 project – Microbial performance of »ECO-innovative, Safe and Energy Efficient materials for a healthier indoor environment«. XIV DBMC Durability of Building Materials and Components, Gent (Belgien), 29. April 2017

Knüpffer, Eva; Bos, Ulrike; Lindner, Jan Paul; Albrecht, Stefan; Krieg, Hannes; Spierling, Sebastian

  • Social impacts of bioplastic value chains – is there a benefit for society? Bioeconomy Congress, Hohenheim, 13. September 2017

Krueger, Nicole

  • Isopleth ranges for a better understanding of wood decay. XIV DBMC Durability of Building Materials and Components, Gent (Belgien), 29. April 2017

Krus, Martin

  • Hygrothermal Calculations for the Application of Typhaboard on Typical Bulgarian Constructions. DBU-Projektmeeting, Sofia (Bulgarien), 11. Mai 2017
  • Typha angustifolia as a basis for the development of a new building material with multiple environmental and practical advantages. RRR2017 Conference on Renewable resources from wet and rewetted peatlands, Greifswald, 27.–28. September 2017

Künzel, Hartwig Michael

  • Hygrothermal fundamentals and loads / Interpretation and evaluation of simulations results and case analysis. Healthy Buildings Asia, Workshop I »Modeling the moisture behavior of building materials and constructions for moisture control analysis and design of energy efficient buildings«, Tainan (Taiwan), 2. September 2017
  • Healthy and durable buildings through moisture control considerations during design and operation. Key-note at Healthy Buildings Asia, Tainan (Taiwan), 3. September 2017
  • Moisture Control – the precondition for healthy and sustainable buildings. Fenestration Bau China: Forum »Better Building, Better Live«, Shanghai (China), 7. November 2017
  • Building and Urban Design in Times of Industry 4.0. Key-note Fenestration Bau China, Shanghai (China), 9. November 2017

Leiss, Norbert

  • Ore separation by pulsed power processing (PPP) and sorting by laser inductive breakdown spectroscopy (LIBS). InnoPlatform, Santiago de Chile (Chile), 21. März 2017

Liebl, Andreas

  • Building Healthy Buildings. Hochschulkonferenz »Stadtkomfort«, Bielefeld, 23. Mai 2017
  • CAS Workplace Management: Akustik. Zürcher Hochschule für Angewandte Wissenschaften Life Sciences und Facility Management, Zürich (Schweiz), 20. Oktober 2017

Liebl, Andreas; Jahncke, Helena

  • Review of research on the effects of noise on cognitive performance 2014-2017. 12th International Congress on Noise as a Public Health Problem, Zürich (Schweiz), 18.–22. Juni 2017

Liebl, Andreas; Zaglauer, Maria; Martin, Noemi

  • Evaluation of measures for the reduction of impairment by background speech at office workplaces: Comparison of measurements and listening tests. 12th International Congress on Noise as a Public Health Problem, Zürich (Schweiz), 18.–22. Juni 2017

Lozanovski, Aleksandar

  • CHIC – final results. Cluster Brennstoffzelle Baden–Württemberg, Stuttgart, 14. September 2017

Martin, Noemi; Liebl, Andreas

  • Sound masking in office environments – Trade-off between masking effect and user acceptance. Acoustics 2017: 173rd Meeting of the Acoustical Society of America and the 8th Forum Acusticum, Boston (USA), 25.–29. Juni 2017

Maysenhölder, Waldemar

  • Solid-borne Sound Intensity: a Personal Perspective. DAGA 2017: 43. Jahrestagung für Akustik, Kiel, 6.–9. März 2017

Mitterhofer, Matthias

  • Semantics For Assembling Modular Network Topologies in FMI-Based Building Performance Simulation. IBPSA Building Simulation, San Francisco (USA), 8. August 2017
  • ECO-SEE – The IEQ Tool. Building Research Establishment (BRE), Garston (Vereinigtes Königreich), 24. August 2017
  • Introduction to the Indoor Environmental Quality (IEQ) Assessment Tool. ECO-SEE – Holistic IEQ Tool Demonstration Workshop, Building Research Establishment (BRE), Watford (Vereinigtes Königreich), 24. August 2017
  • Demonstration of the IEQ Tool. ECO-SEE – Holistic IEQ Tool Demonstration Workshop, Building Research Establishment (BRE), Watford (Vereinigtes Königreich), 24. August 2017

Norrefeldt, Victor

  • Assessment of Thermal Comfort in Cabin and Galley Using the Dressman 2.0 Measurement System. AST 2017, Hamburg, 21.–22. Februar 2017

Pathak, Arnav

  • Fraunhofer Indoor Environment Co-Validation Tool Chain Validation on the Flight Test Facility and Thermal Test Bench. Gesellschaft für Umweltsimulation e.V.: Umwelteinflüsse erfassen, simulieren, bewerten, Pfinztal, 22. März 2017

Scherer, Christian

  • Construction Materials and their Impact on the Environment. drymix.info, Nürnberg, 3. April 2017

Schöner, Tobias

  • Numerical Simulation Methods in Sustainable Design. Seminar TUM ENPB, 21. Dezember 2017

Schrade, Johannes

  • Influence of Night Ventilation on the Cooling Demand of Typical Residental Buildings in Germany. 38th AIVC Conference Ventilating Healthy Low-Energy Buildings, Nottingham (Großbritannien), 14. September 2017

Sedlbauer, Klaus Peter

  • Disruptive changes in construction – new opportunities for building physics. BauHow5 »Position on Circularity in the Built Environment«, Technische Universität München, München, 13. März 2017
  • Disruptive changes in construction – new opportunities for building physics. Talk at Construction Chamber, Guayaquil (Ecuador), 10. August 2017

Siede, Markus; Norrefeldt, Victor; Pathak, Arnav; Grün, Gunnar

  • Indoor Environment Validation Tool Chain – Validierte Klimasimulationen und Messungen für komplexe Innenraumarchitekturen. 46. Jahrestagung der GUS, Karlsruhe, 22.–24. März 2017

Spierling, Sebastian; Knüpffer, Eva; Venkateshwaran, Venkatachalam; Mudersbach, Marina; Behnsen, Hannah; Krieg, Hannes; Albrecht, Stefan; Endres, Hans-Josef

  • The sustainability of bio-based plastics – quantifying environmental and socio-economic aspects of a computer mouse for a circular economy. LCM 2017, Luxemburg (Luxemburg), 4. September 2017

Stratbücker, Sebastian

  • Towards Design Tools for Holistic Assessment of Indoor Environmental Quality. Healthy Buildings, Lublin (Polen), 4. Juli 2017
  • Model Driven Engineering Methods for Integrated Building Performance Optimization. IBPSA Building Simulation, San Francisco (USA), 9. August 2017
  • Integrated Multi-Domain Model. Holistic IEQ Tool Demonstration Workshop, Building Research Establishment (BRE), Garston (Vereinigtes Königreich), 24. August 2017

Wehner, Daniel

  • Cost-effective integration of Life Cycle Assessment in design for environment. SAE 2017 Aerotech Congress, Fort Worth (USA), 27. September 2017
  • Integration of Life Cycle Assessment based eco-design approaches in the development of aircraft parts. AIRTEC 2017 Congress, München, 24. Oktober 2017

Wehner, Daniel; Hossfeld, Max; Held, Michael

  • Turning the cyber physical production system of the world's largest automotive research factory ARENA2036 into a data-gold-mine for eco-design. Going Green EcoDesign 2017, 10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tainan (Taiwan), 29. November 2017

Wössner, Simon

  • Presentation of European Calculation Tools. Workshop »Energy Efficiency in Public Buildings in Serbia – Cost-benefit Tool for Schools and Kindergartens – Information Event« der Deutschen Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, Belgrad (Serbien), 23. Februar 2017
  • Technical Discussion on Standards, Selected Retrofit Measures. Workshop » Energy Efficiency in Public Buildings in Serbia – Cost-benefit Tool for Schools and Kindergartens« der Deutschen Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, Belgrad (Serbien), 9. März 2017
  • Energy Efficiency in Public Buildings – Cooperation with GIZ in Serbia. Workshop »Visit of Turkish Delegation« der Deutschen Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, Holzkirchen, 11. Mai 2017
  • Änderungen – DIN V 18599:2016-08 zu DIN V 18599:2007-02. Workshop »Visit of Korean Delegation«, Stuttgart, 13. Juli 2017
  • Key Features of the German EPC Regulations – Similarities and Differences with European Standards. Workshop »A Way Ahead to Upgrade of EE Regulations in Serbia, with a Special Focus on Cost-optimisation« der Deutschen Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, Belgrad (Serbien), 24. Oktober 2017

Zegowitz,Andreas

  • Introduction of the Fraunhofer Institute for Building Physics IBP. Workshop zum Projekt »Climate-Adapted Material Research for the Socio-Economic Context of Vietnam (CAMaRSEC)«, Hanoi (Vietnam), 25. April 2017

Zirkelbach, Daniel

  • Moisture damage in building practice. WUFI® Basic Course, Oslo (Norwegen), 27.–28. März 2017
  • Coupled heat and moisture transport. WUFI® Basic Course, Oslo (Norwegen), 27.–28. März 2017
  • Material data, climate and surface transfer. WUFI® Basic Course, Oslo (Norwegen), 27.–28. März 2017
  • Evaluation of simulation results. WUFI® Basic Course, Oslo (Norwegen), 27.–28. März 2017
  • Application examples in comparison to field and laboratory tests. WUFI® Advanced Course, Oslo (Norwegen), 28.–29. März 2017
  • Simplified modeling of air infiltration. WUFI® Advanced Course, Oslo (Norwegen), 28.–29. März 2017
  • Rain water leakages in outer walls. WUFI® Advanced Course, Oslo (Norwegen), 28.–29. März 2017
  • Evaluation of pitched roofs with tiles by effective parameters. WUFI®-Advanced-Course, Oslo (Norwegen), 28.–29. März 2017
  • 16. Modelling green roofs. WUFI® Advanced Course, Oslo (Norwegen), 28.–29. März 2017
  • Green roofs – Hygrothermal simulation of Moisture and Energy Performance. Construction Materials for sustainable Future COMS, Zadar (Kroatien), 19.–21. April 2017
  • Moisture Effects and Hygrothermal Evaluation. WUFI® Basic Workshop, Seoul (Südkorea), 16.–17. Mai 2017
  • Fundamentals of Hygrothermal Simulation Models and Validation. WUFI® Basic Workshop, Seoul (Südkorea), 16.–17. Mai 2017
  • Hygrothermal simulation models – Material properties and climate data. WUFI® Basic Workshop, Seoul (Südkorea), 16.–17. Mai 2017
  • Sources, sinks and initial conditions. WUFI® Basic Workshop, Seoul (Südkorea), 16.–17. Mai 2017
  • Evaluation of hygrothermal simulation results. WUFI® Basic Workshop, Seoul (Südkorea), 16.–17. Mai 2017
  • Effects of Moisture and Hygrothermal Performance Evaluation in Building Practice. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017
  • Input data: material properties, climate and surface transfer. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017
  • Evaluation of hygrothermal simulation results. WUFI® Workshop Xtratherm, Navan (Irland), 26.–27. Juni 2017

2016

Adachi, Seiji

  • Wind tunnel test of a 1:6-scaled half wing model with a full–span droop–nose leading edge. Greener Aviation 2016, Belgien (Brüssel), 11. Oktober 2016

Angster, Judit; Miklós, András

  • Applications of photoacoustics in car emission testing (Anwendungsmöglichkeiten der Photoakustik bei Autoabgas Untersuchungen). 3rd International Specialist Conference »Sensors for Exhaust Gas Cleaning and CO2-reduction«, Leipzig, 29. Juni 2016

Angster, Judit; Rucz, Péter; Miklós, András

Antretter, Florian

  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling, Sommerlicher Wärmeschutz. WUFI®-Plus-Seminar, Teublitz, 11.–12. Juli 2016
  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling, Advanced Application. WUFI® Passive Dynamic Seminar, New York (USA), 24.–25. August 2016
  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling, Advanced Application. WUFI® Passive Dynamic-Seminar, Philadelphia (USA), 21.–22. September 2016
  • Shading Calculation for Passive House Certification – Discussion and Development of a New Method. 11th North American Passive House Conference (NAPHC) 2016, Philadelphia (USA), 23. September 2016
  • Implementation and validation of a long-wave heat exchange model. Buildings XIII, Clearwater Beach (USA), 8. Dezember 2016

Antretter, Florian; Pazold, Matthias

  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling, Sommerlicher Wärmeschutz. WUFI®-Plus-Seminar, Holzkirchen, 25.–27. April 2016

Bludau, Christian

  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016
  • Evaluation of hygrothermal simulation results. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016
  • Handling of Typical Constructions. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016
  • Initial Conditions, Sources and Sinks. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016
  • WUFI® Pro Practice Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016
  • Input data: material properties, climate and surface transfer. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14 –15. April 2016
  • The WUFI® Family. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 14.–15. April 2016

Bos, Ulrike; Horn, Rafael; Maier, Stephanie; Beck, Tabea; Lindner, Jan Paul

  • Country Specific Land Use Characterization Factors for Life Cycle Impact Assessment, LCA FOOD. Dublin (Irland), 21. Oktober 2016

Brandstätt, Peter

  • New Technologies for aero-acoustic Developments and Wind Tunnel Design. Annual Conference of China Aeroacoustics, Peking (China), 5. November 2016

de Boer, Jan

  • Final Management: Task 50: Advanced Lighting Solutions for Retrofitting Buildings. 79th Executive Committee Meeting of the IEA Solar Heating and Cooling Programme, Almeria (Spanien), 2. Juni 2016
  • Proposal: Task 50 Follow-on (Concept Paper). 79th Executive Committee Meeting of the IEA Solar Heating and Cooling Programme, Almeria (Spanien), 2. Juni 2016
  • Improving Building Façade Design Using Integration of Daylighting and Thermal Performance. »Sustainable Built Environment Conference« im Rahmen des Green Expo Forums 2016, Doha (Katar), 8. November 2016

Erhorn, Hans

  • Quality of the Work. Sourcebook and Best Practice Examples. Qualicheck Conference, Brüssel (Belgien), 10. Mai 2016
  • Nearly Zero Energy Buildings and Beyond. Konferenz »Energy Transitions in Greece and Germany – Perspectives for 2020 and Beyond« des Bundesministeriums für Wirtschaft und Energie (BMWi), Athen (Griechenland), 1. Juli 2016
  • Quality and Training Schemes for Installers . QUALICHeCK-Webinar, Brüssel (Belgien), 16. September 2016
  • Quality of the Works and Certification of Installers. QUALICHeCK-Webinar, 16. September 2016

Erhorn-Kluttig, Heike

  • Nearly Zero-Energy Buildings – Status in MS and CA Recommendations. CA EPBD III Book Launch, Brüssel (Belgien), 2. Februar 2016

Gehring, Florian; Knüpffer, Eva; Brandstetter, Peter

  • From food waste to graphitic carbon – a sustainable development? European Conference on Operational Research, Posen (Polen), 4. Juli 2016
  • The identification of environmental hotspots in an innovative recycling approach. European Conference on Operational Research, Posen (Polen), 6. Juli 2016 

Graf, Roberta; Baumann, Michael; Horn, Rafael; Brethauer, Laura

  • Energy Autarky and Civic Activism: LCA results as decision support. EcoBalance 2016, Kyoto (Japan), 5. Oktober 2016

Graf, Roberta; Gehring, Florian; Svancarova, Marketa; Ko, Nathanael Lih Wei; Knüpffer, Eva

  • Using MFA to tackle availability considerations – method evaluation with the example of cadmium. SAM 10, Rom (Italien), 10. Mai 2016

Graf, Roberta; Held, Michael; Eckert, Stefan; Weidner, Simone

  • Usage-dependant evaluation of electromobility. EcoBalance 2016, Kyoto (Japan), 6. Oktober 2016

Grün, Gunnar

  • The EFFESUS-Project: Energy Efficiency for EU Historic Districts. Symposium at 3 Salone dell’ Economia, della Conservaione, delle Tecnologie e della Valorizzazione dei Beni Culturali e Ambientali, Ferrara (Italien), 8. April 2016
  • The Passenger Centered Cabin: En Route to Individual Cabin Climate. ILA Berlin: The Future of Cabin Comfort, Berlin, 1. Juni 2016
  • Energy Concepts Along the Lifecycle of Sustainable Cities. World Cities Day Event, Global Cities Forum, Shanghai (China), 30. Oktober 2016
  • Rain of Biocides from Coatings to Run–Off Water. Sino-German Technical Cooperation Seminar on Sponge City, Shanghai (China), 22. Januar 2016

Hofbauer, Wolfgang Karl

  • Biodiversity at Building Structures in Urban and Remote Landscapes and its Management with Special Regard to Bryophytes. VIII SOUTHERN CONNECTION CONGRESS, 18.–23. Januar 2016, Punta Arenas (Chile), 20. Januar 2016
  • Bryophytes and Other Organisms that Colonise Built Surfaces in Chile and Europe – Preliminary Results from Comparative Studies. VIII SOUTHERN CONNECTION CONGRESS, 18.–23. Januar 2016, Punta Arenas (Chile), 23. Januar 2016

Horn, Rafael; Jäger, Michael; Graf, Roberta

  • Planning of ecologically and economic optimized district refurbishments. SBE16, Hamburg, 9. März 2016

Hubschneider, Carolin

  • Integrated Hourly Rating Method for Electric Lighting and Daylighting / Context Sensitive Lighting. Workshop IEA SHC Task Definition Phase (TDF) »Integrated Solutions for Daylight and Electric Lighting«, Stuttgart, 24. Oktober 2016

Ilg, Robert; Brethauer, Laura; Krieg, Hannes, Ko, Nathanael Lih Wei

  • Be in the Future of Sustainable Aviation: Using Eco-Design Tool ENDAMI. Greener Aviation Conference, Brüssel (Belgien), 11.–13. Oktober 2016

Ilg, Robert; Krieg, Hannes; Wehner, Daniel; Brethauer, Laura

  • Advanced analysis by using the eco DESIGN Tool ENDAMI. International Conference on Sustainable Smart Manufacturing (S2M), Lissabon (Portugal), 20.–22. Oktober 2016

Kirmayr, Thomas

  • From Prototyping to Virtual Engineering: A Challenging Journey for the Building Industry. iTwo World Conference, Guangzhou (China), 18. November 2016
  • BIM in Germany. BIMTECNIA, Valladolid (Spanien), 14. Dezember 2016

Knüpffer, Eva; Albrecht, Stefan; Bos, Ulrike; Horn, Rafael; Beck, Tabea

  • Process based assessment of working place related social impacts of products. Life Cycle Working Environment (LCWE), SLCA Conference, Cambridge (USA), 14. Juni 2016

Knüpffer, Eva; Albrecht, Stefan; Krieg, Hannes

  • Bioplastics and society – developing socio-economic indicators for a growing market. European Bioplastics Conference, Berlin, 29. November 2016

Ko, Nathanael Lih Wei; Graf, Roberta; Buchert, Tom; Kim, Marcus; Wehner, Daniel

  • Resource optimized product design – Assessment of a product’s life cycle resource efficiency by combining LCA and PLM in the product development. 49th Conference on Manufacturing Systems, Stuttgart, 27. Mai 2016

Koehler, Mark; Leistner, Philip

  • Solutions for reduction of temporary rail noise. Oral presentation at the 5. internationales Fachsymposium RAIL-NOISE 2016, Berlin, 18.–19. Februar 2016

Krämer, Michael; Brandstätt, Peter; Ickinger, Alex

  • Comparison of Pass-By Noise from Real Track and Simulated Measurement at the Roller Test Bench. Oral presentation at the Internoise 2016, Hamburg, 21.–24. August 2016

Krus, Martin

  • A new load–bearing insulation material made of cattail. Projektmeeting, Sofia (Bulgarien), 5. Juli 2016
  • Comparison of different internal wall insulation systems with reversible application for historic buildings. International Conference on Energy Efficiency and Comfort of Historic Buildings, Brüssel (Belgien), 19.–21. Oktober 2016

Künzel, Hartwig

  • Construction 4.0 – the Benefits of a Digital Twin for the Real Building. Bau Congress China 2016, Peking (China), 6. Juli 2016
  • Construction 4.0 – the benefits of a digital twin building from design to demolition. CESBP / BauSim 2016, Dresden, 14. September 2016
  • Mold growth risk evaluation using the mold index MI. Workshop 5, Buildings XIII Conference, Clearwater Beach (USA), 3. Dezember 2016
  • New Load-Bearing Insulation Material Made of Cattail. Workshop 4, Buildings XIII Conference, Clearwater Beach (USA), 4. Dezember 2016
  • Airflow through Lightweight Wall Assemblies – Influence of Size and Location of Leakages. Session 8, Buildings XIII Conference, Clearwater Beach (USA), 7. Dezember 2016

Lindner, Jan Paul

  • Modelling Biodiversity in Fuzzy Terms. 61st Swiss LCA Discussion Forum, Zürich (Schweiz), 15. März 2016

Lindner, Jan Paul; Schestak, Isabel; Bos, Ulrike; Zibek, Susanne; Brandstetter, Peter

  • LCA of laboratory-scale production of mannosyl erythritol lipids. LCA FOOD, Dublin (Irland), 21. Oktober 2016

Loupos, Konstantinos; Amditis, Angelos; Tsertou, Athanasia; Kalidromitis, Vassilis; Camarinopoulos, Stephanos; Lenas, Sotiris Angelos; Anastasopoulos, Athanasios; Lenz, Katrin; Hill, Mike; Adesiyun, Adewole; Frankenstein, Bernd; Gerhard, Reimund; Damigos, Yannis

  • Skin-like Sensor Enabled Bridge Structural Health Monitoring System. 8th European Workshop on Structural Health Monitoring (EWSHM 2016), Bilbao (Spanien), 5.–8. Juli 2016

Maysenhölder, Waldemar

  • Bloch Waves in an Infinite Periodically Perforated Sheet. Proc. COMSOL Conference, München, 12.–14. Oktober 2016

Mitterhofer, Matthias

  • Automated Collocation of Simulation Modules in FMI-Based Building Energy Co-Simulation. BauSIM 2016, Dresden, 15. September 2016
  • Advanced Modeling and Simulation-Methods for Assessment and Optimization of Indoor Climate. Indoor Air Quality Ventilation & Energy Conservation in Buildings (IAQVEC) 2016, Seoul (Korea), 25. Oktober 2016

Pazold, Matthias

  • Chilled Water Wall. Clima 2016, Aalborg (Dänemark), 24. Mai 2016

Schrade, Johannes

  • Influence of Night Ventilation on the Cooling Demand of Typical Residential Buildings in Germany. Webinar »Qualicheck Platform.eu Ventilative Cooling Potential and Compliance – Status and Perspectives in Spain and Germany«, Stuttgart, 1. Dezember 2016
  • Potential of Ventilative Cooling in German Residential Buildings. QUALICHeCK-Webinar, 1. Dezember 2016

Tanaka, Eri

  • Trend of ecological building in Germany. Big-Seminar, Tokyo (Japan), 11. Januar  2016
  • Trend of ecological building in Germany. Big-Seminar, Osaka (Japan), 16. Januar 2016
  • Local climate models for hygrothermal building component simulations. CESBP / BauSIM 2016, Dresden, 15. September 2016

Thome, Volker

  • Recycling of construction and demolition waste. Universität Prag, Prag, 22. März 2016

Wehner, Daniel; Betten, Thomas

  • Industry 4.0, Mass Personalization and the Importance of Advanced Analytics. Seminar for Chinese Enterprise Leaders, Institut für Mittelstandsforschung. Mannheim, 07. Juli 2016

Wehner, Daniel; Betten, Thomas; Held, Michael; Ilg, Robert

  • Towards Industry 4.0 ready Advanced Sustainability Analytics. Proceedings of the International Conference on Sustainable Smart Manufacturing (S2M), Lissabon (Portugal), 20.–22. Oktober 2016

Wehner, Daniel; Hohmann, Andrea; Albrecht, Stefan; Schwab, Bernhard; Ilg, Robert

  • Effect of different technological and energy supply related measures on the primary energy demand of CFRP production. ECCM17 – 17th European Conference on Composite Materials, München, 29. Juni 2016

Wilhelm, Katrin

  • SmartStone for Heritage Science: mobile environmental monitoring system based on smartphone technology – FLIR ONE for Android – Infrared thermography (IRT) and image analysis with smartphone or tablet. SEAHA conference, EPSRC Centre for Doctoral Training in Science and Engineering in Arts, Heritage and Archaeology, University of Oxford, School of Geography and the Environment, Oxford, 20. Juni 2016

Wössner, Simon

  • District ECA – an Overview. Besuch einer Delegation aus Foshan / China, Stuttgart, 21. Oktober 2016

Zirkelbach, Daniel

  • Moisture damage in building practice. WUFI® Standard Course, Stockholm (Schweden), 13. April 2016
  • Basics of coupled heat and moisture transport. WUFI® Standard Course, Stockholm (Schweden), 13. April 2016
  • Evaluation of hygrothermal simulation results. WUFI® Standard Course, Stockholm (Schweden), 13. April 2016
  • Simplified modeling of air infiltration / application example. WUFI® Advanced Course, Stockholm (Schweden), 14. April 2016
  • Mould growth prediction. WUFI® Advanced Course, Stockholm (Schweden), 14. April 2016
  • Interior insulation systems. WUFI® Advanced Course, Stockholm (Schweden), 14. April 2016
  • Green roof simulation. WUFI® Advanced Course, Stockholm (Schweden), 14. April 2016
  • Differences between one and two dimensional hygrothermal simulations. WUFI® 2D Course, Stockholm (Schweden), 15. April 2016
  • Thermal and moisture bridges. WUFI® 2D Course, Stockholm (Schweden), 15. April 2016
  • Special Applications, numerical Settings, Conclusions. WUFI® 2D Course, Stockholm (Schweden), 15. April 2016

2015

Adachi, Seiji

  • Aeroacoustic Noise Prediction of a Wing with a Droop-nose Leading Edge. DAGA 2015: 41. Jahrestagung für Akustik, Nürnberg, 16.–19. März 2015

Antretter, Florian

  • Simuleringsverktøy: anvendelser for å beregne brukerkomfort – Simulation tools: Application to calculate user comfort. Norsk Treteknisk Institutt, Oslo (Norwegen), 20. Januar 2015
  • Building simulation as a tool for future projections of indoor climate in historic buildings. IBP Kolloquium, IBP Holzkirchen, 6. Februar 2015
  • Modeling Moisture Transport through the Envelopeand it‘s impact on the interior environment. ASHRAE conference, Atlanta (USA), 30. Juni 2015
  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling, Sommerlicher Wärmeschutz. WUFI®-Plus-Seminar für Wolf System Haus, Freienfeld (Italien), 6.–7. Juli 2015
  • Indoor climate surveys and analysis of occupant behavior Static versus dynamic passive building design. Is hygric inertia (moisture buffering) comparable to thermal inertia? Targeting future challenges – Fluctuating building operation. Nineteenth Annual Westford Symposium on Building Science, Westford (USA), 4. August 2015
  • The Dynamic Side of WUFI® Passive, WUFI® Passive Background, WUFI® Passive Fundamentals, WUFI® Passive Validation, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling. 2015 North American Passive House Conference andPro Practice Session. WUFI® Passive Seminar, Chicago (USA), 9.–10. September 2015
  • Integrated climate specific passive house design with WUFI® Passive. Passive House Conference, Ningbo (China), 31. Oktober 2015
  • Background and Principles Results Assessment and Application WUFI® Passive Summary and Outlook. The 2015 China Passive Ultra-low Energy Building Conference und WUFI® Passive Seminar, Qingdao (China), 4. November 2015
  • Key-Note zu »Challenges in Passive House Design in International Context«. The 2015 China Passive Ultra-low Energy Building Conference, Qingdao (China), 5.–6. November 2015
  • WUFI® Plus – Dynamic hygrothermal whole building simulation. Technische Universität München, München, 17. November 2015

Beck, Tabea

  • Harmonization of LCAs for bio-based products – Carbon Balancing. Statustreffen Bioökonomie, Universität Hohenheim, Stuttgart, 29. Oktober 2015

Bludau, Christian

  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich) 26.–27. März 2015
  • Evaluation of hygrothermal simulation results. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 26.–27. März 2015
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 26.–27. März 2015
  • Handling of Typical Constructions. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 26.–27. März 2015
  • Initial Conditions, Sources and Sinks. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 26.–27. März 2015
  • Input data: material properties, climate and surface transfer. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich) 26.–27. März 2015
  • The WUFI® Family. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 26.–27. März 2015
  • WUFI® Pro Practice Session. WUFI® Workshop »Heat & Moisture Simulation«, London (Vereinigtes Königreich), 26.–27. März 2015
  • Hygrothermal analysis of (building) components. Presentation for Company. Holzkirchen, 11. September 2015
  • Effects of moisture and hygrothermal performance evaluation in building practice. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Evaluation of hygrothermal simulation results. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Fundamentals of hygrothermal simulation models and validation. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Handling of Typical Constructions. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Initial Conditions, Sources and Sinks. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Input data: material properties, climate and surface transfer. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Project Case I. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Project Case II. WUFI®-Workshop »Heat & Moisture Simulation«, Climate Design, Technische Universität München, München, 6. November 2015
  • Fundamentals of hygrothermal simulation models and validation. WUFI® Workshop, Ghent (Belgien), 16.–17. Dezember 2015
  • Handling of Typical Constructions. WUFI® Workshop, Ghent (Belgien), 16.–17.Dezember 2015
  • Project Case I. WUFI® Workshop, Ghent (Belgien), 16.–17.Dezember 2015
  • Project Case II. WUFI® Workshop, Ghent (Belgien), 16.–17.Dezember 2015

Brethauer, Laura; Baumann, Michael; Bos, Ulrike

  • Spatial distribution of LCA results for the use phase of extended range electric vehicles. LCM 2015, Bordeaux (Frankreich), 1. September 2015

de Boer, Jan

  • Advanced Lighting Solutions for Retrofitting Buildings: Introducing IEA SHC Task 50. 5th Industry Workshop IEA SHC Task 50 »Advanced Lighting Solutions for Retrofitting Buildings«, Ålesund (Norwegen), 16. März 2015

Dittrich Sebastian

  • Recycling of compound material like concrete by pulsed power processing. Workshop »Recycling«, St. Gobain CREE, Cavaillon (Frankreich), 3. Juni 2015

Erhorn, Hans

  • Towards 2020 – Nearly Zero-Energy Buildings. Energy Demand Management Committee (EDMC) der EU, Brüssel (Belgien), 11. Februar 2015
  • School of the Future. Technical Session IBPC-Conference, Turin (Italien), 16. Juni 2015
  • Application to Quality of the Works – Specific Features. 2nd QUALICHeCK Conference EPBD Review – Elements for Better Compliance and Quality of Works, Brüssel (Belgien), 4. September 2015
  • Energy Efficient Buildings and Constructions. International Conference on Climate Action (ICCA 2015), Hannover, 1. Oktober 2015
  • Towards 2030 – Enhance Nearly Zero Energy Buildings to a Growing Plus Energy Market. Fraunhofer Allianz Bau-Forum»Building Innovation – Ready for the Market«, Holzkirchen, 23. Oktober 2015

Erhorn-Kluttig, Heike

  • Energy Renovations in Germany – What Finland can Learn. 2nd FINVAC-Building Energy Seminar, Helsinki (Finnland), 8. Oktober 2015

Gehring, Florian; Graf, Roberta; Seifert, Severin; Lindner, Jan Paul

  • Recycling – Is there an ecological benefit of secondary commodity sources? LCA XV, Vancouver (Kanada) 6. Oktober 2015

Giannakis, Georgios; Lilis, Georgios; Garcia, Miguel Angel; Kontes, Giorgos; Valmaseda, Cesar; Rovas, Dimitrios

  • A methodology to automatically generate geometry inputs for energy performance simulation from IFC BIM models. Building Simulation, Hyderabad (Indien) 7.–9. Dezember 2015

Graf, Roberta; Held, Michael

  • Resource Availability from a LCA Perspective – Method development to enable decision support. LCA XV, Vancouver (Kanada), 8. Oktober 2015

Graf, Roberta; Ko, Nathanael Lih Wei; Buchert, Tom; Kim, Marcus

  • Resource optimized Product Design – supporting developers in design phase with environmental performance data, Luxembourg Institute of Science and Technology, Society And Materials International Conference SAM9, Kirchberg (Luxemburg), 11. Mai 2015

Graf, Roberta; Wehner, Daniel; Held, Michael; Eckert, Stefan; Weidner, Simone; Faltenbacher, Michael

  • Beyond the Lab – Environmental Performance of Electromobility. LCA XV, Vancouver (Kanada), 7. Oktober 2015

Hofbauer, Wolfgang Karl

  • Mosses involved in the primary colonization of modern building surfaces – genetic aspects. International Association of Bryologists (IAB) Conference, Puerto Wiliams (Chile) 14. Januar 2015

Homolka, Sarah; Gantner, Johannes; Schneider, Sarah; Dieringer, Sandra; Bos, Ulrike

  • Assessment of environmental impacts of retrofitting solutions in shopping centers. LCM 2015, Bordeaux (Frankreich), 31. August 2015

Ilg, Robert

  • Sustainability in Aviation – the ENDAMI Eco-Design Tool. Aerodays 2015: Aviation in Europe – Innovating for Growth, London (Vereinigtes Königreich), 21. Oktober 2015

Kallert, Anna Maria

  • Development of an exergy assessment method for low temperature district heating supply. International Doctoral Colloquium – Grid-supportive Buildings, Fraunhofer Institute for Solar Energy Systems, Freiburg, 22. April 2015

Kersken, Matthias

  • IEA Annex 58: Full-scale Empirical Validation of Detailed Thermal Simulation Programs. 6th International Building Physics Conference, Turin (Italien), 14.–17. Juni 2015
  • A full-scale empirical validation study applied to thermal simulation programs. 14th International Conference of the International Building Performance Simulation Association, Hyderabad (Indien), 7.–9. Dezember 2015

Ko, Nathanael Lih Wei; Gantner Johannes

  • Approach to put local environmental impacts in context to local added value – the example of ship scrapping within the lifecycle. Institute of Science and Technology, Society And Materials International Conference SAM9, Kirchberg (Luxemburg), 11. Mai 2015

Ko, Nathanael Lih Wei; Gantner, Johannes; Schestak, Isabel

  • Life cycle assessment of ship scrapping. LCAnet Workshop, Karlsruhe, 16. November 2015

Ko, Nathanael Lih Wei; Krieg, Hannes; Ilg, Robert; Wehner, Daniel

  • The ENDAMI Project for Sustainable Aviation, Clean Sky General Forum, Brüssel (Belgien), 17. März 2015

Krause, Michael

  • Sustainable production facilities: Challenges, requirements, opportunities. Continental International Energy Management Conference, Frankfurt, 2. Dezember 2015

Krieg, Hannes; Ilg, Robert

  • ecoDESIGN Tool ENDAMI – enabling sustainability in aviation. International Paris Air Show, Paris (Frankreich), 17. Juni 2015

Krus, Martin

  • A new load bearing insulation material made of cattail. First International Conference on Bio-based Building Materials (ICBBM), Clermont-Ferrand (Frankreich), 23. Juni 2015

Kuang, Wei; Angster, Judit; Dubovski, Zlatko; Leistner, Philip; Yang, Jun; Miklos, Andras

  • Sound Radiation Pattern of the Sheng Pipes. DAGA 2015. 41. Jahrestagung für Akustik, Nürnberg, 16.–19. März 2015

Künzel, Hartwig

  • Identifying the causes of building degradation and finding appropriate solutions through hygrothermal analysis. Key-note 1st International Symposium on Building Pathology (ISBP) & 5° Congreso de Patología y Rehabilitación de Edificios (PATORREB), FEUP, Porto (Portugal), 27. März 2015
  • Criteria defining rain protecting external rendering systems. 6th International Conference on Building Physics (IBPC), Turin (Italien), 16. Juni 2015
  • Climate specific design and operation principles for healthy and durable buildings. BAU Congress China 2015, Peking (China), 24. Juni 2015
  • Safeguarding hygienic conditions and durable building envelope systems by hygrothermal simulation. Key-note Building Envelope Hygrothermal Process Forum, China Academy of Building Research (CABR), Peking (China), 25. Juni 2015
  • Effects of moisture and hygrothermal performance evaluation / Hygrothermal fundamentals and WUFI® Application. WUFI® Seminar, CABR, Peking (China), 26. Juni 2015
  • Methods of adapting building technologies for different climate zones. Fraunhofer-Iranian workshop Latest developments and technologies in building physics, Holzkirchen, 20. Juli 2015
  • Moisture control design by hygrothermal simulation / Today’s challenges – Renewable energy supply and intermittent operation / How can Bavarian castles survive the rising tourist onslaught? 19th Annual Westford Symposium on Building Science, Westford (USA), 4. August 2015
  • Multi Climate Global Passive House. Key-note 10th Annual North American Passive House Conference, Chicago (USA), 12. September 2015
  • Methods of adapting building technologies for different climate zones. Building Innovation Forum, Holzkirchen, 23. Oktober 2015

Lilis, Georgios; Giannakis, Georgios; Rovas, Dimitrios

  • Detection and semi-automatic correction of geometric inaccuracies in IFC files. Building Simulation, Hyderabad (Indien), 7.–9. Dezember 2015

Lindner, Jan Paul

  • Biodiversity as a fuzzy impact category. LCA XV, Vancouver (Kanada), 8. Oktober 2015

Lozanovski, Aleksandar; Gebald, Christoph; Brandstetter, Christian Peter; Lindner, Jan Paul; Albrecht, Stefan

  • Life Cycle Assessment of Direct Air Capture of CO2, 8th Biennial Conference of the International Society for Industrial Ecology. University of Surrey, Guildford (Vereinigtes Königreich), 10. Juli 2015

Lozanovski, Aleksandar; Ko, Nathanael Lih Wei; Bos, Ulrike

  • Life Cycle Assessment of Electric Fuel Cell Buses and Hydrogen Production Pathways, 8th Biennial Conference of the International Society for Industrial Ecology. University of Surrey, Guildford (Vereinigtes Königreich), 9. Juli 2015

Mayer, Florian

  • EcoDesign – Aircraft Recycling – Challenges and Solutions. Paris Airshow, Le Bourget (Frankreich), 17. Juni 2015
  • Air Quality – MOX Sensor for Air Quality Monitoring in Aircraft Cabin. Paris Airshow, Le Bourget (Frankreich), 18. Juni 2015

Maysenhölder, Waldemar

  • Transmission loss of one-dimensional systems with frequency-dependent complex masses. Proc. NOVEM 2015, Dubrovnik (Kroatien), 13.–15. April 2015

Mitterer, Christoph

  • Energy Efficient Buildings in Different Climate Zones: International Approach to Economic and Climate Specific Design with WUFI® Passive. Beijing, 11th Green Building Conference, Peking (China), 31. März 2015

Pazold, Matthias

  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling. WUFI® Plus Seminar, ENSTIB Université de Lorraine, Epinal (Frankreich), 29. September 2015
  • WUFI® Plus Background, WUFI® Plus Fundamentals, WUFI® Plus Application, Hygrothermal Whole Building Simulation Results Assessment, Air-Flow Modeling, Detailed HVAC Simulation. WUFI®-Plus-Seminar, Fraunhofer ISE, Freiburg, 3.–5. November 2015

Reiß, Johann

  • Sustainable Refurbishment of Museum Buildings – Energy Efficiency, Preservation of Monuments and Sophisticated Solutions for Museums – Exemplary Presentation of Mathildenhöhe, Darmstadt. Symposium »Choosing the Green Way – Sustainable Strategies in Cultural Heritage« der Hochschule für Technik und Wirtschaft Berlin, Berlin, 4. Mai 2015

Scherer, Christian

  • Leaching Behaviour of Mortars and Renders – Laboratory Experiments vs. Real Climate Exposition. European Mortar Organisation EMO, Lissabon (Portugal), 21. Mai 2015
  • Climate change, construction products and emerging pollutants. Öko-Institut / Solutions Workshop, Frankfurt/Main, 8. September 2015

Schmidt, Dietrich

  • Grid Interactive Buildings. Resource-Efficient Energy Systems in the Built Environment REESBE Conference, Gävle (Schweden), 24. März 2015
  • Low Temperature District Heating for Future Energy Systems. 37th Euroheat & Power Congress, Tallinn (Estland), 28. April 2015
  • Integration of high shares of solar and wind power in future energy systems through high performance building. 6th Arab-German Energy Forum 2015, Berlin, 26. November 2015

Schmidt, Dietrich; Kallert, Anna Maria

  • Low Temperature District Heating for Future Energy Systems (IEA DHC Annex TS1). 4th International Exergy, Life Cycle Assessment and Sustainability Workshop & Symposium ELCAS, Nisyros (Griechenland), 12. Juli 2015
  • LowEx Communities: Optimised Performance of Energy Supply Systems with Exergy Principles (EBC Annex 64). 4th International Exergy, Life Cycle Assessment and Sustainability Workshop & Symposium ELCAS, Nisyros (Griechenland), 13. Juli 2015

Schneider, Georg Ferdinand

  • Development of a semantic data model for building automation systems. Vorlesungsreihe »Bauphysik in der Forschung« Technische Universität München, München, 1. Dezember 2015

Tan, Helene Aude

  • Definition of the needs for enhanced building operation using BIM. 22. Industriebauseminar, Wien (Österreich), 1.–3. Juli 2015

Thome Volker

  • Usage of fibers for application in construction materials. Huntsman-Workshop, Basel (Schweiz), 26. Februar 2015
  • Recycling of Construction and Demolition Waste. Workshop on Latest Developments and Technologies in Building Physics, Holzkirchen, 21. Juli 2015

Wehner, Daniel; Jäger, Michael

  • Sustainable Construction. Delegationsbesuch der School of Architecture, Tsing Hua University China, Technische Universität München, München, 28. Juli 2015

Winkler, Matthias

  • Creation and evaluation of future indoor climate and risk maps for European cultural heritage buildings and their interior (Präsentiert von Johanna Leissner). Our Common Future Under Climate Change Conference, Paris (Frankreich), 7.–10. Juli 2015
  • Implementation and application of a PCM model in a hygrothermal building simulation software. Advanced Building Skins Conference 2015, Bern (Schweiz), 3.–4. November 2015

Wössner, Simon

  • Structure of the Lighting Retrofit Advisor. 5th Industry Workshop IEA SHC Task 50 »Advanced Lighting Solutions for Retrofitting Buildings«, Ålesund (Norwegen), 16. März 2015

Yu, Young Jae

  • Model.based simulation of heat pumps potential of thermal storage in single.family houses for Demand-Side Management using low.voltage grid. CISBAT 2015 International Conference, Lausanne (Schweiz), 10. September 2015
  • Heating systems based on renewable energy sources for citiy districits and buildings. AHK Konferenz, Seoul (Korea), 20. Oktober 2015

Zegowitz, Andreas

  • Drying behaviour of floor and wall constructions after water damage with artificial drying methods. 1st International Symposium on Building Pathology, Porto (Portugal), 27. März 2015

Zegowitz, Andreas; Renzl, Anna Maria; Hofbauer, Wolfgang; Meyer, Jörg; Künzel, Hartwig

  • Drying Behaviour of Floor and Wall constructions after Water Damage with Artificial Drying Methods. 1th International Symposium on Building Pathology, ISBP2015, Porto (Portugal), 27. März 2015

Zirkelbach, Daniel

  • Considering typical imperfections in the hygrothermal design process. HMT Numerical Modelling and Performance Based Design – Doctoral Course Politecnico die Milano, Mantua (Italien), 11. März 2015
  • Modeling green and gravel roofs. HMT Numerical Modelling and Performance Based Design – Doctoral Course Politecnico die Milano, Mantua (Italien), 11. März 2015
  • Modeling ventilated roof and wall assemblies. HMT Numerical Modelling and Performance Based Design – Doctoral Course, Mantua (Italien), 11. März 2015
  • Heat and Moisture transport in 2D. Heat and HMT Numerical Modelling and Performance Based Design – Doctoral Course Politecnico die Milano, Mantua (Italien), 12. März 2015
  • Mould Risk Classification Based on Comparative Evaluation of Two Established Growth Models. 6th International Building Physics Conference IBPC2015, Turin (Italien), 16. Juni 2015
  • Moisture behaviour of wooden flat roofs with and without greenery. Waterproof Membranes Conference 2015, Bonn, 19. November 2015
  • Climate data for hygrothermal simulations. WUFI® Workshop Passiefhuis-Platform, Ghent (Belgien), 16. Dezember 2015
  • Hygrothermal material properties. WUFI® Workshop Passiefhuis-Platform, Ghent (Belgien), 16. Dezember 2015
  • Moisture Effects and Hygrothermal Evaluation. WUFI® Workshop Passiefhuis-Platform, Ghent (Belgien), 16. Dezember 2015
  • Evaluation of hygrothermal Simulation results. WUFI® Workshop Passiefhuis-Platform, Ghent (Belgien), 17. Dezember 2015

Zolanvari, Seyed Mohammad Hassan

  • Acoustics: Competences, resources, projects. Workshop on Latest Developments and Technologies in Building Physics, Holzkirchen, 21. Juli 2015
  • Environment-friendly Products and Sustainability. Workshop on Waste and waste water management / air quality in indoor environments, Duisburg, 20. November 2015